Adhesive Applications >>
Adhesive can be used in a variety of corresponding materials (such as metal, industrial plastics, glass ......), in accordance with the different materials or structures, as the choice of the way of adhesive.
Commonly used adhesives do have several options:
1. Heated adhesive
2. uv-curing
3. RTV Type : Sliconn / Epoxy / PU
Generally have the following common types of correspondence material
A. Metal / Plastic / Glass adhesive |
A. Metal / Plastic / Glass Adhesive
Heated |
Product NO. | Visccosity(CPS) | Curing Condition |
| Thermosetting | DE-111 | 10000 CPS | 150 C/ 5min |
| DE-153 | 100000 CPS |
RTV |
Product NO. | Curing Time | Substrate |
| Two Parts | DEO-200 | 10 min | Metal / Plastic / Glass |
| DEO-256 | 2 Hours | Metal / Plastic / Glass |
RTV |
Product NO. | Curing Time | Method used |
| RTV ( Sliconn / Pu Type ) | DU-450 | 10 min surface cure | At room temperature for 10-15 minutes surface cure, full cure after 24 hours |
| DS-400 | 15 min surface cure |
RTV |
Product NO. | Curing Time | Method used |
| Cyanoacrylate | DB-641 | 1-3 min surface cure | After dispensing dried at room temperature, can be Temporarily fixed for about 3-5 minutes |
| DB-661 | 1-3 min surface cure |
uv-curing |
Product NO. | Viscosity(CPS) | Method used |
UV Type |
DV-3612 | 1000~1500cps | After dispensing, using UV light irradiation, approximately 5-20 seconds, can be cured |
| DV-326 | 4000-5000cps | ||
| DV-303 | 10000~13000cps | ||
| DV-352 | 20000 cps | ||
| DV-3582 | 30000~80000 cps |
|
B. Metal / Plastic Adhesive
Plastic and metal Subsequently, the material is often encountered in combination, the following four reference.
Heated |
Product NO. | Visccosity(CPS) | Curing Condition |
| Thermosetting | DE-111 | 10000 CPS | 150 C/ 5min |
| DE-153 | 100000 CPS |
RTV |
Product NO. | Curing Time | Substrate |
| Two Parts | DEO-200 | 10 min | Metal / Plastic / Glass |
| DEO-256 | 2 Hours | Metal / Plastic |
RTV |
Product NO. | Curing Time | Method used |
| RTV ( Sliconn / Pu Type ) | DU-450 | 10 min surface cure | At room temperature for 10-15 minutes surface cure, full cure after 24 hours |
| DS-400 | 15 min surface cure |
RTV |
Product NO. | Curing Time | Method used |
| Cyanoacrylate | DB-641 | 1-3 min surface cure | After dispensing dried at room temperature, can be Temporarily fixed for about 3-5 minutes |
| DB-661 | 1-3 min surface cure |
Photo-curing compound |
Product NO. | Viscosity(CPS) | Method used |
UV Type |
DV-326 | 5000cps | After dispensing, using UV light irradiation, approximately |
| DV-381 | Thixotropy |
|
C. Metal / Glass Adhesive
Glass / metal combination, depending on demand, there are four products available options:
Heated |
Product NO. | Visccosity(CPS) | Curing Condition |
| Thermosetting | DE-111 | 10000 CPS | 150 C/ 5min |
| DE-153 | 100000 CPS |
RTV |
Product NO. | Curing Time | Substrate |
| Two Parts | DEO-200 | 10 min | Metal / Plastic / Glass |
| DEO-256 | 2 Hours | Metal / Plastic |
RTV |
Product NO. | Curing Time | Method used |
| RTV ( Sliconn / Pu Type ) | DU-450 | 10 min surface cure | At room temperature for 10-15 minutes surface cure, full cure after 24 hours |
| DS-400 | 15 min surface cure |
uv-curing |
Product NO. | Viscosity(CPS) | Method used |
UV Type |
DV-305 | Can load more than 100KG | After dispensing, using UV light irradiation, approximately 5-20 seconds, can be cured |
| DV-326 | 5000cps | ||
| DV-381 | Thixotropy |
|
D. Silicone / Rubber Adhesive
Silicone / Rubber / PP / PE Then the material, there have three products available choices, then the intensity is different.
RTV |
Product NO. | Curing Time | Method used |
| Two Parts | DEO-2916 | 10 min surface cure | mixing AB |
RTV(Component) |
Product NO. | Curing Time | Method used |
| Cyanoacrylate | DB-600 | 1-2 min surface cure | room temperature curing |
RTV(Component) |
Product NO. | Viscosity(CPS) | Method used |
| Sliconn | DS-412 | 15 min surface cure | room temperature curing |
|